A VIPAIR windshield is an excellent accessory for protecting ATV drivers from wind and road obstacles. One of its components is, of course, the visor. Over time, the visor can accumulate dirt, insects, and other residues, reducing its transparency.

It is important, therefore, to regularly clean the visor to maintain a clear view of the road. In this article, we will share some simple tips for effectively cleaning the VIPAIR windshield visor.

Necessary materials: Before starting, make sure you have the necessary materials.
You will need:
1- A hose
2- Quality glass cleaner (e.g., Bonami)
3- A soft cloth (preferably microfiber)

Step 1: Using a hose, thoroughly rinse your windshield with cold water to remove dirt and mud. Keep a distance of at least 24 inches between the hose and your windshield.

Step 2: Apply the glass cleaner to the entire windshield.

Step 3: Rinse the windshield to remove all the glass cleaner.

Step 4: Allow to air dry or pat the visor dry with a soft cloth. Do not rub.

Important:
• Do not use solvents, gasoline, denatured alcohol, acetone, rain repellents, wax, or any other protectants.
• Do not use rough cloths, blades, scrapers, or brushes, as you will damage the visor.

By following these simple steps, you will enjoy effective cleaning of the VIPAIR windshield visor. Regular maintenance will not only ensure safer driving but also prolong the lifespan of this essential vehicle component. Take the time to clean your visor regularly for an optimal driving experience.

Is your windshield visor damaged and you want to replace it? Nothing easier, order it online on our website!